|
CHIEF PDC2170 SPECIFICATIONS - (PDC-2170) |
|
Roll Adjustment |
3 degrees |
|
Pitch Adjustment |
5 degrees up, 15 degrees down on gravity-centered axis point |
|
Manual Yaw Adjustment |
360 degrees |
|
Compatibility |
Interface brackets are compatible with all other 2000 Series products |
|
Color |
Black |
|
Weight Capacity |
350 lbs.
158.75 kg |
FAQs common to Series Dual Ceiling Mount:
Q: Why choose the PDC?
A: The PDC is designed for applications that require back-to-back Large Flat Panel Displays. The pitch can be easily adjusted and set allowing the displays to be located well above eye level. Integrated security allows for a padlock to secure the display to the mount.
Q: How does the gravity-centered axis point assist the display’s pitch adjustment?
A: Chief’s exclusive design counteracts the weight of the Large Flat Panel Display, allowing for the hand pitch adjustment to work with the display’s weight and balance on its own center of gravity. The display stops where you leave it and then easily pitches by hand to another location on the axis.
Q: Do I need to order a separate interface bracket?
A: No, the PDC Ceiling Mount ships as a complete assembly that includes the interface bracket. Determine which model will accommodate your display by looking up the manufacturer and model number on the cross-reference chart.
Q: How do I stack two Dual Ceiling Mounts?
A: The PDC pipe end will thread into the bottom of another PDC Mount. Determine that your ceiling structure can support up to 5x the total weight of the installation.
Q: do I mount two different Large Flat Panel Displays on the PDC?
A: You need to order the PDC unit based on one display manufacturer/model number. Order a separate PSB bracket for the other display. You will have an extra bracket.
Q: How do I attach the PDC to the ceiling?
A: A ceiling plate and extension column must be purchased separately. Select a ceiling plate with a 2" NPT opening such as CMA-210 or CMA-332.
|
